Specifications
154
6
If you combine this function with the Duplex (Top to Top) function and select
the "P1, P2" or "1/n, 2/n" format, the page numbers on the back of are printed
as follows:
1.
Front
2.
Back
❖
❖❖
❖ Front Cover, Front/Back Cover
• If Blank mode is selected, the cover will not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings
made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• If Display Time is selected to the At Mode Selected, settings made in
Cover Sheet Tray will take priority.
• If Display Time is selected to Full Time, settings made in Paper Type
will take priority.
See “Paper Type” and “Cover Sheet Tray” in “Tray Paper Settings”,
General Settings Guide.
❖
❖❖
❖ Designate
When "Combine (1 Sided→2 Sided)" has been selected, specified pages will
always be copied on the front of copies in the same way as in Chapters mode.
❖
❖❖
❖ Slip Sheets
If you do not copy onto slip sheets, they are excluded from the number of cop-
ies counted.
❖
❖❖
❖ Connect Copy
Important
❒ Do not use the connecting cable with other equipment.
❒ Always turn off the main power of the main and sub-machines when be-
fore disconnecting the cable. Otherwise it might lead to malfunctioning of
the two machines.
• You can store on a program whether or not to use Connect Copy.
• Select the copy paper using the main machine.
• When [] is pressed, only the paper trays common to both ma-
chines will be displayed. The other paper trays appear faded out and
cannot be selected.
GCSTMPBE
1
2
MartiniC2_EN_Copy-F1_FM.book Page 154 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
