Supplementary Specifications
155
6
• When two or more trays hold the desired paper size, the paper tray will
be selected according to the Paper Tray Priority settings made on the re-
spective machine. See “Tray Paper Settings”, General Settings Guide.
• If the {
{{
{Clear Modes}
}}
} key is pressed on the main machine while you are mak-
ing settings, Connect Copy will be cancelled.
• Even if the sub-machine is in Energy Saver mode, the main machine can
still connect to make copies.
• When an Interrupt job on the sub-machine has finished, press the {
{{
{Inter-
rupt}
}}
} key.
• Connect Copy jobs are displayed on the Job List of the sub-machine. How-
ever, they cannot be deleted from the sub-machine.
• In Connect Copy, both machines follow the user authentication settings of
the main machine.
• You cannot manage the number of copies according to machine. The
number of copies is shown as a total of the two machines, and is moni-
tored on the main machine
• Even if user codes are set and you enter a user code before using the
sub-machine, you cannot manage the number of copies made on the
sub-machine.
• If user codes are set on only the sub-machine, you need not enter a user
code in order to use the sub-machine for Connect Copy. In this case, you
cannot manage the number of copies according to user.
MartiniC2_EN_Copy-F1_FM.book Page 155 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
