Turning On the Power
29
1
-
--
-Auto Off
The machine automatically turns it-
self off when the job is finished, after
a certain period of time has elapsed.
This function is called “Auto Off”.
Note
❒ You can change the Auto Off time.
See p.60 “Auto Off Timer”.
❒ The Auto Off Timer function will
not operate in the following cases:
• When a warning message ap-
pears
• When the service call message
appears
• When paper is jammed
• When the cover is open
• When the “
Add Toner
" message
appears
• When toner is being replen-
ished
• When the User Tools/Counter
screen is displayed
•
When fixed warm-up is in progress
• When the printer or other func-
tions are active
• When operation was suspended
during printing
• When the Data In indicator is
on or blinking
•
When the sample print or locked
print screen is displayed
MartiniC2_ENzen_F_pre_FM.book Page 29 Tuesday, July 27, 2004 1:24 PM
To Next Page
Loading...
