Ricoh DSm651 - Page 536

Connecting and Setting Up
18
2
*1
Appears when the optional IEEE 1394 interface board is installed.
*2
Appears when the optional IEEE 802.11b interface unit is installed.
If Ethernet and 802.11b (wireless LAN) are both connected to the machine, the select-
ed interface has priority.
*3
Minimum settings required to use transmission.
*4
Minimum settings required to use reception.
*5
Check[
Effective
] is selected for TCP/IP.
*6
If you select [On] for [POP before SMTP], select this function also.
*7
If you select [On] for [POP before SMTP], check the port number for [POP3].
*8
If you select [On] for [SMTP Authentication], select this function also.
IEEE 802.11b
(wireless LAN)
Interface Settings/
Network
See p.35 “Network”.
Permit SNMP V3 Communication ❍
Permit SSL / TLS Communication ❍
Host Name ❍
Interface Settings/
IEEE 802.11bDocument
Server
*2
See p.39 “IEEE
802.11b”.
Communication Mode $
SSID Setting ❍
Channel ❍
WEP (Encryption) Setting ❍
Transmission Speed ❍
File Transfer
See p.40 “File Trans-
fer”.
SMTP Server
*3
$
SMTP Authentication ❍
POP before SMTP ❍
Reception Protocol
*4
$
POP3 Setting
*6
❍
Administrator's E-mail Address
*8
❍
E-mail Communication Port
*4 *7
$
E-mail Reception Interval ❍
Max. Reception E-mail Size ❍
E-mail Storage in Server ❍
Program / Change / Delete E-
mail Message
❍
Program / Change / Delete
Subject
❍
E-mail Account
*3 *4
$
Interface Settings