Understanding the Displayed Information
117
4
Configuring the Network Interface Board
Use the following command to display network interface board settings:
• telnet : Use the “show” command. See p.96 “show”.
Item Description
Common
mode
Protocol Up/Down [
up
] means "active" and [
down
] means "inactive".
appletalk
TCP/IP
netware
SMB
IP over 1394
SCSI print
Ethernet interface Internal version number
Syslog priority
NVRAM version Internal version number
Device name Printer name
Comment Comment
location Location of the printer in the SNMP and Rendezvous in-
formation
Contact Administrator information for the printer and contact
information in the SNMP information
Soft switch
appletalk
mode AppleTalk protocol in selection
Net Network number
Object Macintosh printer name
Type Type of printer
Zone Name of the zone that the printer belongs to
To Next Page
Loading...
