Ricoh DSm651 - Page 651

Printing Files Directly from Windows
133
5
ftp
Use the "put" or "mput" command ac-
cording to the number of files to be
printed.
❖
❖❖
❖ When one file is printed
ftp> put \pass name\file
name [option]
❖
❖❖
❖ When multiple files are printed
ftp> mput \pass name\file
name [\pass name\file
name...] [option]
Follow the procedure below to print
using the "ftp" command.
A
AA
A
Formulate the printer's IP address
or the host name of the hosts file
printer as an argument and use
the "ftp" command.
% ftp printer's IP address
B
BB
B
Enter the user name and pass-
word, and then press the {
{{
{# Enter}
}}
}
key.
To use the default account, enter
“admin” as user name, and leave
the password blank.
User:
Password:
When user authentication is set,
enter a login user name and pass-
word.
C
CC
C
When printing a binary file, set
the file mode to binary.
ftp> bin
When printing a binary file in AS-
CII mode, print may not come out
correctly.
D
DD
D
Specify files to be printed.
The following shows the examples
of printing a PostScript file named
"file 1" in the "C:\PRINT" directory
and printing file 1 and file 2.
ftp> put C:\PRINT\file1
filetype=RPS
ftp> mput C:\PRINT\file1
C:\PRINT\file2
E
EE
E
Quit ftp.
ftp> bye
Note
❒ “=”, “,”, “_”, and “;”cannot be
used for filenames. File names
will be read as option strings.
❒ For “mput” command, option
can not be defined.
❒ For “mput” command, “*” and
“?” can be used as wild cards in
file names.
❒ When printing a binary file in
ASCII mode, print may not
come out correctly.