Settings You Can Change with User Tools
61
4
❖
❖❖
❖ System Auto Reset Timer
The System Reset setting automatically switches to the screen of the function
set in Function Priority when no operations are in progress, or when an inter-
rupted job is cleared. This setting determines the system reset interval. See
p.53 “Function Priority”.
Note
❒ Default: 60 seconds
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖
❖❖
❖ Copier/Document Server Auto Reset Timer (Copier/Document Server)
You can specify the time to elapse before copier and Document Server func-
tions are reset.
Note
❒ Default: 60 seconds
❒ If [Off] is selected, the machine will not automatically switch to the user
code entry screen.
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖
❖❖
❖ Scanner Auto Reset Timer (Scanner)
You can specify the time to elapse before the scanner function is reset.
Note
❒ Default: 60 seconds
❒ If [Off] is selected, the machine will not automatically switch to the user
code entry screen.
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖
❖❖
❖ Set Date
You can set the date for the copier's internal clock using the number keys.
Note
❒ To change between year, month and day, press [←
←←
←] and [→
→→
→].
❖
❖❖
❖ Set Time
You can set the time for the copier's internal clock using the number keys.
Note
❒ To change between hours, minutes and seconds, press [←
←←
←] and [→
→→
→].
MartiniC2_ENzen_F_pre_FM.book Page 61 Tuesday, July 27, 2004 1:24 PM
To Next Page
Loading...
