7
I
II
I
Press [Yes].
The machine restarts automatical-
ly, and overwriting begins.
J
JJ
J
When overwriting is completed,
press [Exit], and then turn off the
main power.
Important
❒ Should the main power switch
of the machine be turned off be-
fore Erase All Memory is com-
pleted, overwriting is canceled.
Make sure the main power
switch is not turned off during
overwriting.
Note
❒ If the main power is turned off
when Erase All Memory is in
progress, overwriting will start
again when you next turn on the
main power.
❒ If an error occurs before over-
writing is completed, turn off
the main power. Turn it on
again, and then repeat from step
B
.
Canceling Erase All Memory
A
AA
A
Press [Cancel] while Erase All
Memory is in progress.
B
BB
B
Press [Yes].
Erase All Memory is canceled.
C
CC
C
Turn off the main power.
Note
❒ To resume overwriting after
power off, turn on the main
power of the machine, and then
repeat the procedure in “Using
Erase All Memory”.
To Next Page
Loading...
