Basics
40
2
Sample Print and Adjustment
Once the master making has been
completed, it is possible to confirm
the print finish before pressing the
{Print} mode select key to start the
printing process.
A Press the {Proof} key.
A single printed page is ejected.
Note
❒ Press the key continuously to
eject printed pages in succes-
sion.
Adjusting the Print Image
Position
After master making, you can adjust
the print image position to suit your
needs. There are two ways:
❖ Shifting the Image Position Forward
or Backward
Shift the image position using the
{Image Position} keys.
❖ Shifting the Image Position to the
Right or Left
Shift the image position using the
side tray fine adjusting dial.
Shifting the Image Position Forward or
Backward
* Paper feed direction
ANT010S
GRFORW0E
To Next Page
Loading...
