SERVICE RAM ADDRESSES 30 November, 1999
4-52
8000AD(H) - User parameter switch 13
Bits 0 and 1: PSTN access method from behind PABX
Bit 1 0 Setting
0 0 PSTN
0 1 Loop start
1 0 Ground start (Europe & Asia model only, excluding France
models)
1 1 Flash start (Europe & Asia model only)
Bits 2 to 7: Not used
8000B9(H) - User function 62 settings
Bit 0: Night timer 0: Disabled, 1: Enabled
Bits 1 to 3: Not used
Bit 4: RDS operation 0: Not acceptable
1: Acceptable for the limit specified by system switch 03
Bits 5 and 6: Not used
Bit 7: Daylight saving time 0: Disabled, 1: Enabled
8000BA(H) - User function 62 setting
Bit 0: Not used
Bit 1: Dialing type 0: Pulse dialing (10 PPS), 1: Tone (DTMF) dialing
Bits 2 to 7: Not used
8000BB(H) - PSTN access number for loop start
Access number Hex value to program (BCD)
0 F0
ØØ
0 F0
00 00
ØØ
99 99
8000BC(H) - User function 61 setting
Bits 0 to 7: The number of rings when auto mode is selected 0-99 (BCD)
8000BF(H) - User function 62 setting
Bit 0 to 7: Not used, do not change the setting.
8000C8 to 8000DB(H)
- RTI (Max. 20 characters - ASCII) -
Note 1
8000DC to 8000EF(H)
- CSI (Max. 20 characters - ASCII)
8000F0 to 80010F(H)
- TTI (Max. 32 characters - ASCII) -
Note 1
800110(H)
- Number of CSI characters (Hex)
Note 1
: If the number of characters are less than the maximum (20 for RTI, 32 for
TTI), add a stop code (FF[H]) after the last character.
800111 to 80011F(H)
- Service station's fax number (Service function 13)
800120 to 80012E(H)
- Own fax number (User function 61)
800131(H)
- Confidential ID (low - BCD)
800132(H)
- Confidential ID (high - BCD)
To Next Page
Loading...
