Ricoh FAX2000L - Fusing Lamp and Hot Roller

FUSING 30 November, 1999
6-12
6.6.4 FUSING LAMP AND HOT ROLLER
A: Fusing Lamp (2 screws)
NOTE: When installing a new fusing lamp, be sure that it is installed the
correct way around, as shown.
ø
CAUTION
Be careful not to touch the glass surface.
First, remove the bracket [B] and 2 screws [C], then the fusing upper and lower
units come apart.
D: Hot Roller
H545R510.WMF
H545R509.WMF
H545R512.WMF
[A]
[D]
[B]
[C]
[D]