4.3 TRAY PAPER FEED ROLLER ADJUSTMENT
NOTE:
Perform this adjustment if the customer uses
only
either A size (A3,
A4, or A5) or B size (B4 or B5) paper in the paper tray.
1. Remove the tray paper feed roller. (See Tray Feed Roller Replacement.)
2. For A sizes move the feed rollers [A, B] to position "a."
3. For B sizes move the feed rollers [A, B] to position "c."
NOTE:
1) Position "b" is the default setting.
2) In North America, if the customer
never
uses executive size
paper in the paper tray, set the feed rollers to position "a".
a
b
c
[A]
[B]
[A]
a
b
c
c
b
a
c
b
a
A219R567.wmf
Replacement
Adjustment
20 December 1996 PAPER FEED
6-31
To Next Page
Loading...
