15
4 Make sure that the “Set Paper” indicator is lit.
If it is off, press the Energy Saver key to exit Energy Saving mode.
5 If any previous settings remain, press the Clear Modes key.
6 Set the density, the number of copies, and other optional settings you requires such as Trailing
Edge.
7 Set the paper along the size indication on the
Bypass Table.
Slide the paper straight into the copier until it
stops. The copier will soon pull it in.
8 Set the Original Guide to match the original
width.
SM006
SM057
Paper Length
Synchro
Preset/
Variable
Leading Edge
Trailing Edge
Copy Counter
Function Select
Bypass Select/
Roll Paper Cut
Copy Media
Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Cut Select
Preset Cut
Lighter Copy
Set
Original
Energy
Saver
To Next Page
Loading...
