3. When the RF Select indicator
lights up on the panel, press the RF
Select key. The roll feeder starts.
Once the copier has set the copy
paper, the beeper will sound.
4. Wait until the Set Original indi-
cator lights up on the operation
panel.
5. Place your original face up on
the original table. Slide the origi-
nal straight into the copier until
the copier pulls it in.
6. The original comes out from the
opening just under the original
table
¬
. The copy is delivered from
the slot on top of the copier
.
C
¬
Copying With The Roll Feeder COPYING
5
To Next Page
Loading...
