Ricoh FW770 - Page 319

Basic Copying (Copying to sheets)
17
2
B
If any previous settings remain, press the {
{{
{Clear Modes/Energy Saver}
}}
} key.
C
Press the {
{{
{Start}
}}
} key for more than 3 seconds.
The green indicator, which is next to the start key, goes on.
Note
❒ If you want to use this setting as a default, ⇒ P.42 “Settings You Can Change
with User Tools”
D
Select any copy settings you require, such as the media type or copy densi-
ty.
Press the {Paper Select/Cut} key to select either one of the Roll Feeder or By-
pass Tray.
Note
❒ If you select two roll feeder, select one of the roll.