15
4 Make sure that the “Set Paper” indicator is lit.
If it is off, press the Energy Saver key to exit Energy Saving mode.
5 If any previous settings remain, press the Clear Modes key.
6 Set the density, the number of copies, and other optional settings you require such as Leading
Edge.
7 Set the paper along the size indication on the
Copy Paper Table. Or set the Paper Guides
(option), to match the paper width.
8 Slide the paper straight into the copier until it
stops. The copier will soon pull it in.
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
RF Select/Cut
Copy Media
Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper
RF
Select
Wait
Vellum
Film
Cut Select
Preset Cut
Lighter Copy
Set
Original
Energy
Saver
SB008
SB007
To Next Page
Loading...
