Ricoh FW770 - Page 77

17
Notes
p Do not hold down or pull out the original during copying. Do not put pressure on the original
cover.
p If you do not insert the original at a certain time after you have inserted the paper,
the paper will exit automatically.
p If you do not insert the paper at a certain time after you have inserted the original, the original
will exit automatically.
p If the copier is idle at a certain time after you have used it, the machine resets itself to the initial
settings (Auto Clear). If applicable, the copier will enter the Energy Saver mode automatically.
p You can preset the initial settings of the copier ⇒ see page 35 "Changing The Default Setting”
p If the copier is not used for a long period, it will turn itself off.