21
6 Center your original face up on the Original
Table. Slide the original straight into the copier
until the copier pulls it in.
7 Just as the trailing edge of the original passes
the horizontal line of the Semi-auto synchro
cut mark, press the Cut key.
Notes
p To cancel copying, press the Clear/Stop key. The copier finishes the operation in progress, and
delivers the copy and the original.
pTo call off on-going copying, for example, when you have inserted a wrong blueprint, press the
Cut key. The machine interrupts the operation in progress, and delivers the copy and the
original.
SB015
SB016
To Next Page
Loading...
