This controls input/output, and the interfaces with the optional units, and the operation panel.
3. Controller:
The controller board controls the following functions:
• SD card (Option/Service)
• Memory DIMM
• IEEE1284
• IEEE802.11a/g
• IEEE802.11g
• Bluetooth
• Gigabit Ethernet
• NVRAM
• HDD
• PictBridge
4. LD Drive Board:
This is the laser diode drive circuit board.
5. HDD Unit (Option):
The HDD unit stores data for the following.
• Additional software fonts
• Collation
• Locked print
• Sample print
• Downloaded forms for form overlay
6. Memory DIMM (Resident: 256MB DRAM, Option: 128/256MB DRAM):
This increases printer processing memory, and is also used for collation and for soft fonts.
7. Operation Panel Board:
Controls the display panel, the LED, and the keypad.
8. IEEE1284 Interface (Option):
This is a parallel printer port.
9. USB 2.0:
Lets you connect the machine to a computer.
10. Bluetooth (Option):
Lets you connect the machine to a computer with a wireless connection.
11. IEEE802.11a/g or g wireless LAN (Option):
Overview
347
To Next Page
Loading...
