PRINTER ENGINE SERVICE MODE
SM 5-31 G065
Service
Tables
5.1.3 INPUT CHECK
Enter the SP mode and select SP5803.
1. Press !" together (5s), release, then press #(Enter).
System Ver.1.00
1. Service
2. Press ".
System Ver. 1.00
2. Engine
3. Press #(Enter).
<Engine>
1. Feed
4. Press " to display “5. Mode”.
<Engine>
5. Mode
5. Press #(Enter).
SP5024
mm/inch Display
6. Press ! to display “Input Check”.
SP5803 >>
Input Check
7. Press #(Enter).
SP5803-001
Paper Feed 1
8. Press ! or " to select the item to check.
SP5803-013
Full Exit Tray 2
9. Press #(Enter). Refer to the table on the next page.
Full Exit Tray 2
(7)00001010(0)
To Next Page
Loading...
