Ricoh G104 - Page 128

SERVICE MODE TABLE
G104 5-12 SM
1003 026 Tray 1: Thin: RS *EGB
1003 027 Tray 1: Special *EGB
1003 028 Tray 2: Normal 2: LS *EGB
1003 029 Tray 2: Normal 2: RS *EGB
1003 030 Tray 2: Thick 2 *EGB
1003 031 Tray 2: Thin: LS *EGB
1003 032 Tray 2: Thin: RS *EGB
1003 033 Tray 2: Special *EGB
1003 034 Tray 3: Normal 2: LS *EGB
1003 035 Tray 3: Normal 2: RS *EGB
1003 036 Tray 3: Thick 2 *EGB
1003 037 Tray 3: Thin: LS *EGB
1003 038 Tray 3: Thin: RS *EGB
1003 039 Tray 3: Special *EGB
1003 040 By-pass: N2: LS *EGB
1003 041 By-pass: N2: RS *EGB
1003 042 By-pass: Thick 2 *EGB
1003 043 By-pass: Thin: LS *EGB
1003 044 By-pass: Thin: RS *EGB
1003 045 By-pass: Special *EGB
1004 [Mt Speed] Drive Motor Speed DFU
(Unit, Process Speed, Paper Type)
Paper Type ->N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick
paper 2 (see the Specifications table for details on these paper weights)
Process Speed-> LS: Low speed, RS: Regular speed
CW: Clockwise, CCW: Counterclockwise
PFU: Optional paper tray unit
1004 001 DEV / OPC [K]: LS *EGB
1004 002 DEV / OPC [K]: RS *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01 %/step]
1004 003 DEV [CMY]: LS *EGB
1004 004 DEV [CMY]: RS *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 005 OPC [CMY]: LS *EGB
1004 006 OPC [CMY]: RS *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 007 Fusing: LS *EGB
1004 008 Fusing: RS *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / 1.4 / 0.01%/step]
1004 009 Transfer Belt: LS *EGB
1004 010 Transfer Belt: RS *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 011 PFU: LS *EGB
1004 012 PFU: RS *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 013 Duplex: LS: Add *EGB
1004 014 Duplex: RS: Add *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 015 Duplex: LS *EGB
1004 016 Duplex: RS *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 017 Reverse: LS: CW *EGB
1004 018 Reverse: RS: CW *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 1.4 / 0.01%/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA