Ricoh G104 - Page 142

SERVICE MODE TABLE
G104 5-26 SM
2152 041 [Y]: Area 2 *EGB
2152 042 [Y]: Area 3 *EGB
2152 043 [Y]: Area 4 *EGB
2152 044 [Y]: Area 5 *EGB
2152 045 [Y]: Area 6 *EGB
2152 046 [Y]: Area 7 *EGB
2152 047 [Y]: Area 8 *EGB
2152 048 [Y]: Area 9 *EGB
2152 049 [Y]: Area 10 *EGB
2153 [MUSIC Setting] Timing for Automatic Line Position Adjustment (MUSIC)
2153 001 Auto Execution *EGB
Enables or disables the automatic line
position adjustment. If this SP is 0, the
adjustment is never done.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 002 Process Control *EGB
Enables or disables the adjustment after
process control is done.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 003 Initialization *EGB
Enables or disables the adjustment
immediately after the power is turned on or
when recovering from energy save mode.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 004 Data In *EGB
Enables or disables the adjustment
immediately after the machine starts to
receive print job data. The adjustment is
done if one of the conditions set with
SP2153-012, -013 and –015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
2153 005 Cut In *EGB
Enables or disables the adjustment during
printing. The adjustment is done if one of the
conditions set with SP2153-012, -013 and –
015 is satisfied.
[0 or 1 / 1 / -] Alphanumeric
0: No, 1: Yes
2153 006 Job End *EGB
Enables or disables the adjustment after
printing.
[0 or 1 / 0 / -] Alphanumeric
0: Off, 1: On
2153 008 Trans. Belt Speed 2 *EGB
Enables or disables the transfer belt speed
correction during the adjustment. The
transfer belt speed is affected by changes in
temperature. A change of the transfer belt
speed during the adjustment causes color
registration errors. This SP keeps the
transfer belt at a constant speed.
[0 or 1 / 1 / -] Alphanumeric
0: Off, 1: On
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA