Ricoh G104 - Page 143

SERVICE MODE TABLE
SM 5-27 G104
Service
Tables
2153 010 Manual Cut In *EGB
If this number of pages was printed after the
previous adjustment was done, then the
adjustment is done again. The number of
sheets is counted in SP7806-003 and –004.
[10 to 999 / 190 / 1 page/step]
2153 012 MUSIC Temp. *EGB
If the room temperature changes by this
amount or more after the previous
adjustment was done, then the adjustment is
done again.
[2 to 30 / 5 / 1°C/step]
2153 013 Passage Time *EGB
If this amount of time has passed after the
previous adjustment was done, then the
adjustment is done again.
[0 to 1440 / 360 / 1 min/step]
2153 015 Maginificat. Error *EGB
Sets the threshold (magnification error) from
previous MUSIC for executing MUSIC.
[0 to 10 / 1 / 0.1%/step]
[MUSIC Result] Result of Automatic Line Position Adjustment
([Color],Value, Unit)
Value-> Skew, Bent, M. Scan Erro.: Main Scan Error, S. Scan Erro.: Sub Scan
Error, M. Cor: Main Scan Correction, S. Cor: Sub Scan Correction
Unit-> Dot, SubD.: Sub Dot, 600/ 1200 dpi
2181
The following SPs display the result of MUSIC for each mode.
2181 001 [K]: Skew *EGB
2181 002 [K]: Bent *EGB
2181 003 [K]: M. Scan Erro. *EGB
2181 004 [K]: S. Scan Erro. *EGB
[-5000 to 5000 / 0 / 1 um/step]
2181 005 [K]: M Cor.: Dot *EGB [-127 to 127 / 0 / 1 dot/step]
2181 006 [K]: M Cor.: SubD. *EGB [-127 to 127 / 0 / 1 sub-dot/step]
2181 007 [K]: S Cor.: 600 *EGB [-127 to 127 / 0 / 1 line/step]
2181 008 [K]: S Cor.: 1200 *EGB [-127 to 127 / 0 / 1/step]
2181 011 [M]: Skew *EGB
2181 012 [M]: Bent *EGB
2181 013 [M]: M. Scan Erro. *EGB
2181 014 [M]: S. Scan Erro. *EGB
[-5000 to 5000 / 0 / 1 um/step]
2181 015 [M]: M Cor.: Dot *EGB [-127 to 127 / 0 / 1 dot/step]
2181 016 [M]: M Cor.: SubD.. *EGB [-15 to 15 / 0 / 1 sub-dot/step]
2181 017 [M]: S Cor.: 600 *EGB [-127 to 127 / 0 / 1 line/step]
2181 018 [M]: S Cor.: 1200 *EGB [-127 to 127 / 0 / 1/step]
2181 021 [C]: Skew *EGB
2181 022 [C]: Bent *EGB
2181 023 [C]: M. Scan Erro. *EGB
2181 024 [C]: S. Scan Erro. *EGB
[-5000 to 5000 / 0 / 1 um/step]
2181 025 [C]: M Cor.: Dot *EGB [-127 to 127 / 0 / 1 dot/step]
2181 026 [C]: M Cor.: SubD.. *EGB [-15 to 15 / 0 / 1 sub-dot/step]
2181 027 [C]: S Cor.: 600 *EGB [-127 to 127 / 0 / 1 line/step]
2181 028 [C]: S Cor.: 1200 *EGB [-127 to 127 / 0 / 1/step]
2181 031 [Y]: Skew *EGB
2181 032 [Y]: Bent *EGB
[-999 to 999 / 0 / 1 um/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA