SERVICE MODE TABLE
G104 5-34 SM
2433
[Normal2: [K]] Transfer roller current and discharge plate voltage for the image
area, plain paper 2, black toner
(Process Speed, Paper Side) Process Speed -> LS: Low speed,
Paper Side: 1st or 2nd
2433 007 LS: 1st: T. Roll 2 *EGB Adjusts the transfer roller current.
[0 to 60 / 10.0 / 0.1 -µA/step]
2433 008 LS: 1st: Separa. *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2433 012 LS: 2nd: T. Roll 2 *EGB
[0 to 60 / 7.5 / 0.1 -µA/step]
2433 013 LS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2437
[Normal2: [FC]] Transfer roller current and discharge plate voltage for the
image area, plain paper 2, CMY toner
(Process Speed, Paper Side) RS: Regular Speed, Paper Side: 1st or 2nd
2437 013 RS: 1st: T. Roll 2 *EGB Adjusts the transfer roller current.
[0 to 60 / 20.0 / 0.1 -µA/step]
2437 014 RS: 1st: Separa. *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2437 021 RS: 2nd: T. Roll 2 *EGB
[0 to 60 / 20.0 / 0.1 -µA/step]
2437 022 RS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2438
[Normal2: [FC]] Transfer roller current and discharge plate voltage for the
image area, plain paper 2, CMY toner
(Process Speed, Paper Side) LS: Low Speed, Paper Side: 1st or 2nd
2438 013 LS: 1st: T. Roll 2 *EGB Adjusts the transfer roller current.
[0 to 60 / 10.0 / 0.1 -µA/step]
2438 014 LS: 1st: Separa. *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2438 021 LS: 2nd: T. Roll 2 *EGB
[0 to 60 / 15.0 / 0.1 -µA/step]
2438 022 LS: 2nd: Separa. *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2451
[Normal2:[K]:LE] Transfer roller current and discharge plate voltage for the
leading edge area, plain paper 2, black toner
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2451 003 Separation *EGB
2451 007 Trans.Roll2: 1st *EGB
2451 012 Trans.Roll2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2452
[Switch Timing] Switch timing from leading edge to normal, plain paper 2
(Paper Type, Edge) Paper Type -> N: Normal, LE: Leading Edge
2452 002 T. Roll 2: N2: LE *EGB [0 to 200 / 10 / 1 mm/step]
2452 003 Separation: N2: LE *EGB [0 to 200 / 25 / 1 mm/step]