ENGINE SERVICE MODE
SM 5-65 G104
Service
Tables
5844 [USB]
5844 001 Transfer Rate *CTL Adjusts the USB transfer rate.
[0 to 1 / 0 / 1/step] Alphanumeric
0: Auto Change, 1: Full speed
5844 002 Vendor ID *CTL Displays the vendor ID.
5844 003 Product ID *CTL Displays the product ID.
5844 004 Dev Release Num *CTL Displays the device release version number.
5845 [Delivery Srv] Delivery Server
5845 003
Retry Interval
*CTL Specifies the retry interval.
[60 to 900 / 300 / 1 second/step]
5845 004
No. of Retries
*CTL Specifies the maximum number of retries.
[0 to 99 / 3 / 1/step]
5846 [UCS Setting]
5846 003 Maximum Entries Displays the number of maximum entries.
5846 050 Init All Dir *CTL
Initializes all address information data except
the administration account.
5846 098 Bit SW 2 *CTL FA
5846 099 Bit SW *CTL FA
5848 [Web Service]
5848 004 ac: ud *CTL
Enables or disables the udirectory access
limitation.
0000: Disabled, 0001: Enabled
5848 011 ac: dm *CTL
Enables or disables the devicemanagement
access limitation.
0000: Disabled, 0001: Enabled
5856 [Remote Update]
5856 002 Local Port
Allows the technician to updade the firmware
using a parallel cable.
[0 to 1 / 0 / 1/step]
0: Disable, 1: Enable
5857 [Save Debug Log]
5857 001 On/ Off *CTL
Enables or disables the debug log saving
function.
[0 to 1 / 0 / 1/step] Alphanumeric
0: On, 1: On
5857 002 Target *CTL Sets the storage location for the debug log.
[2 to 3 / 2 / 1/step]
2: HDD, 3: SD
5857 005 Save to HDD *CTL Sets the key number of the debug log.
5857 006 Save to SD *CTL Sets the key number of the debug log.
To Next Page
Loading...
