ENGINE SERVICE MODE
G104 5-68 SM
5860 025 SMTP Auth Direct
*CTL
Selects directly the way of SMTP
authentication if all SMTP authentications fail
due to the error in the SP5860-006.
This SP is activated only when SP5860-003
is set to “Enable”.
Bit switch 0: LOGIN
Bit switch 1: PLAIN
Bit switch 2: CRAM MD5
Bit switch 3: DIGEST MD
Bit switch 4 - 7: Not used
5866 [E-Mail Alert]
5866 001 Notice Func E-Ma *CTL
Enables or disables the alert notice function
by e-mail.
[0 to 1 / 0 / 1/step]
0: Off, 1: On
5866 005 Add Date Field *CTL
Enables or disables to add the date field on
the alert notice e-mail.
[0 to 1 / 0 / 1/step]
0: Off, 1: On
5869 [RAM Disk Setting]
5869 001 Mail Function *CTL#
Enables or disables the e-mail transfer
function. This SP sets the RAM disk size for
the e-mail transfer function.
[0 to 1 / 0 / 1/step]
0: On, 1: Off
5870 [Common Key Info W] Common Key Information Writting
5870 001 Writing
Writes the authentication data (used for
NRS) in the memory.
5870 003 Initialize
Initializes the authentication data in the
memory.
5873 [SD Card Appli Move]
5873 1 Move Exec 5.4
5873 2 Undo Exec 5.4
To Next Page
Loading...
