Ricoh G104 - Page 185

ENGINE SERVICE MODE
SM 5-69 G104
Service
Tables
5907
[Plug/ Play] Plug/ Play Name Selection
5907 001 *CTL
[0 to 8 / 0 / 1/step]
MFG MDL
0 RICOH Aficio CL4000DN
1 RICOH Aficio CL4000HDN
2 SAVIN CLP26DN
3 Gestetner C7425dn
4 NRG C7425dn
5 NRG C7425hdn
6 infotec IPC 2525
7 infotec IPC 2525e
8 LANIER LP125cx/LP126cn
5930
[Meter Click Ch.] Meter Click Charge
5930 001 *EGB
Enables or disables the Meter Charge mode.
When enabling the Meter Charge mode, the
“Counter” menu is added to the user menu.
[0 or 1 / 0 / -] Alphanumeric
0: OFF, 1: ON
5930 010 *EGB Enables or disables the PM warning of the
PCU when enabling the meter charge.
[0 or 1 / 1 / -] Alphanumeric
0: ON, 1: OFF
5930 014 *EGB Enables or disables the PM warning of the
Intermediate Transfer Belt Unit when enabling
the meter charge.
[0 or 1 / 1 / -] Alphanumeric
0: ON, 1: OFF
5930 016
*EGB Enables or disables the PM warning of the
Maintenance Kit when enabling the meter
charge.
[0 or 1 / 1 / -] Alphanumeric
0: ON, 1: OFF
5950 [Factory Default]
5950 001 *EGB
Enables the first initial setting. This SP is set to
1 in the factory. This SP is cleared after first
turning the main power on.
[0 or 1 / 0 / -] FA
0: Disables, 1: Enables
5952
[Under F. Adjust] Under Factory Adjustment
5952 001 *EGB [0 or 1 / 0 / -] FA
5953
[dehumidifier] Tray heater Switch Setting
5953 001 *EGB
Enables or disables the tray heater on/off
switch when the main power switch is on.
[0 to 1 / 0 / -] Alphanumeric
0: Off, 1: On
5970
[Debug Serial] Debug Serial Port Setting
*CTL
DFU
⇒
⇒
⇒
Rev. 06/2006
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA