Service Mode Table
SM 5-7 G160/G161
G160/G161
1: Disabled
Bit 4 to 7: Not used. Do not change the settings.
1001 006 Bit Switch 6 *CTL
1001 007 Bit Switch 7 *CTL
1001 008 Bit Switch 8 *CTL
Adjusts bit switch settings. DFU
1003 [Clear Setting]
1003 001 Initialize System
Initializes settings in the System menu of the
user mode.
1003 003 Delete Program
DFU
1004 [Print Summary]
1004 001 Service Summary
Prints the service summary sheet (a summary
of all the controller settings).
1005 [Display Version]
1005 001 Printer Version Displays the version of the controller firmware.
1007 [Supply Display]
1007 001 Development *CTL
[0 or 1 / 1 / 1 /step]
1007 002 PCU *CTL
[0 or 1 / 1 / 1 /step]
1007 003 Transfer *CTL
[0 or 1 / 1 / 1 /step]
1007 004 Int. Transfer *CTL
[0 or 1 / 1 / 1 /step]
1007 005 Transfer Roller *CTL
[0 or 1 / 1 / 1 /step]
1007 006 Fuser *CTL
[0 or 1 / 1 / 1 /step]
1007 007 Fuser Oil *CTL
[0 or 1 / 1 / 1 /step]
1101 [ToneCtlSet]
1101 001 Tone (Factory) *CTL
1101 2 Tone (Prev.) *CTL
1101 3 Tone (Current) *CTL
Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
[ToneCtlSet] *CTL
1102
Sets the printing mode (resolution) for the printer gamma adjustment. The
To Next Page
Loading...
