Ricoh G104 - Page 397

Service Mode Table
SM 5-17 G160/G161
G160/G161
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 057 Duplex: LS: Thick 2 *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 058 DEV / OPC [K]: LS: SP *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 059 DEV [CMY]: LS: SP *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 060 OPC [CMY]: LS: SP *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 061 Fusing: LS: SP *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 062 Trans. Belt: LS: SP *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 063 PFU: LS: SP *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 064 Duplex: LS: SP *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 065 DEV / OPC [K]: LS: TN *EGB
1004 066 DEV / OPC [K]: RS: TN *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01 %/step]
1004 067 DEV [CMY]: LS: Thin *EGB
1004 068 DEV [CMY]: RS: Thin *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 069 OPC [CMY]: LS: Thin *EGB
1004 070 OPC [CMY]: RS: Thin *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 071 Fusing: LS: Thin *EGB
1004 072 Fusing: RS: Thin *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / P2a: 1.4, P2b: 1.05 /
0.01%/step]
1004 073 Trans. Belt: LS: TN *EGB
1004 074 Trans. Belt: RS: TN *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 075 PFU: LS: Thin *EGB Adjusts the speed of the feed motor in the
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA