Ricoh G104 - Page 535

Service Mode Table
SM 5-155 G160/G161
G160/G161
SP9-XXX
9001
[Shutter Motor]
9001 064 Open Time *EGB
Adjusts the open shutter time.
[0 to 990 / 210 / 10 ms/step]
9001 065 Close Time *EGB
Adjusts the closed shutter time.
[0 to 990 / 100 / 10 ms/step]
[Filming Remov.] Filming Removal
9001 074 Interval: [k] *EGB
Adjusts the threshold for filming removal. This
SP is executed even the print job is
proceeding.
[0 to 65535 / 150 / 1/step]
[Vb: LS] Vb at Low Process Speed
9001 083 Vb Shift *EGB
[0 to 65535 / 10 / 1/step]
[Vc: LS] Vc at Low Process Speed
9001 084 Vc Shift *EGB
[0 to 65535 / 0 / 1/step]
[Filming Remov.] Filming Removal: Job end
9001 099 Interval (E): [K] *EGB
Displays the counter that counts the number
of sheets in black and white printing mode
from previous filming removal.
[0 to 65535 / 0 / 1/step]
9001 100 Interval (E): [FC] *EGB
Displays the counter that counts the number
of sheets in full color printing mode from
previous filming removal.
[0 to 65535 / 0 / 1/step]
9001 101 Interval: [end] *EGB
Adjusts the threshold for job end filming
removal. This SP is not executed until the
print job has ended.
[0 to 65535 / 75 / 1/step]
9001 102 Vk Coef.
[0.00 to 1.00 / 0.00 / 0.01 /step]
9001 103
[0 to 100 / 100 / 1%/step]
9001 104 Fusing JAM Cnt
Displays the paper jam counter of the fusing
unit.
[0 to 255 / 0 / 1/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA