Service Mode Table
SM 5-157 G160/G161
G160/G161
9910 [Factory Adj.]
9910 001 Charge Output *EGB Performs the charge output.
9910 003 [All] TC Initial *EGB Performs the toner supply for all colors.
9910 004 [All] TC Initial *EGB
Performs the developer initializing for all
colors.
9910 005 [K] TC Initial *EGB Performs the developer initializing for black.
9910 006 [M] TC Initial *EGB
Performs the developer initializing for
magenta.
9910 007 [C] TC Initial *EGB Performs the developer initializing for cyan.
9910 008 [Y] TC Initial *EGB Performs the developer initializing for yellow.
9910 010 [K] Toner FillUP *EGB Fills up the black toner.
9910 011 [M] Toner FillUP *EGB Fills up the magenta toner.
9910 012 [C] Toner FillUP *EGB Fills up the cyan toner.
9910 013 [Y] Toner FillUP *EGB Fills up the yellow toner.
9910 020 Upper Limit *EGB
Specifies the threshold for completing the
toner filled up. When the toner is detected
three times, the filling up the toner ends.
[0 to 5/ 3 / 1 /step]
9910 021 MUSIC Vsg Adj. *EGB
Selects the Vsg adjustment execution when
the line position adjustment is manually done.
[1 to 3 / 3 / 1 /step]
1: Normal (ON except the line position
adjustment at printout interval)
2: Always ON
3: Always OFF
9911 [TC Initial]
9911 001 Maximum Repeat *EGB
Adjusts the maximum toner cartridge
initializing time.
[1 to 30 / 15 / 1 /step]
9911 002 Threshold *EGB
Adjusts the threshold for toner cartridge
initializing.
[1 to 100 / 20 / 0.01 V/step]
To Next Page
Loading...
