SERVICE PROGRAM MODE
G108 5-30 SM
8381*
T: Total PrtPGS
8384*
P: Total PrtPGS
8387*
O: Total PrtPGS
The number of sheets that the application program tries to
print (excluding the pages printed in the SP mode)
[0~9999999/ 0 / 1/step]
• A3/DLT simplex is counted as two if the A3/DLT double-count program is
validated.
• The following pages are not counted as printed pages:
• Blank pages in a duplex printing job
• Blank pages inserted as document covers, chapter title sheets, and slip
sheets
• Reports printed to confirm counts
• All reports done in the service mode (service summaries, engine
maintenance reports, etc.)
• Test prints for machine image adjustment
• Error notification reports
• Partially printed pages as the result of a jam
8391*
LSize PrtPGS The number of sheets printed on A3/DLT and larger sizes
[0~9999999/ 0 / 1/step]
8411*
Prints/Duplex The number of sheets used in duplex printing
[0~9999999/ 0 / 1/step]
• The counter increases by +1 when both sides (front/back) are printed. The
counter does not increase when one of the two sides is not printed (e.g., the last
page of the documents that have three pages, five pages, seven pages, and so
on).
To Next Page
Loading...
