SERVICE PROGRAM MODE
G108 5-32 SM
8441*
T: PrtPGS/Ppr Size
8444*
P: PrtPGS/Ppr Size
8447*
O: PrtPGS/Ppr Size
The number of sheets of a specific paper size that the
application program uses
[0~9999999/ 0 / 1/step]
001 A3 007 LG
002 A4 008 LT
003 A5 009 HLT
004 B4 010 Full Bleed
005 B5 254 Other (Standard)
006 DLT 255 Other (Custom)
• These counters do not distinguish between LEF and SEF.
8451*
PrtPGS/Ppr Tray The number of sheets fed from a specific tray
[0~9999999/ 0 / 1/step]
001 Bypass Bypass Tray
002 Tray 1 Copier
003 Tray 2 Copier
004 Tray 3 Paper Tray Unit/LCT (Optional)
005 Tray 4 Paper Tray Unit (Optional)
006 Tray 5 (Not used)
007 Tray 6 (Not used)
008 Tray 7 (Not used)
009 Tray 8 (Not used)
010 Tray 9 (Not used)
8461*
T: PrtPGS/Ppr Type
8464*
P: PrtPGS/Ppr Type
The number of sheets of specific paper types
[0~9999999/ 0 / 1/step]
001 Normal 005 Normal (Back)
002 Recycled 006 Thick (Back)
003 Special 007 OHP
004 Thick 008 Other
• These counters increase when the paper is output. On the other hand, the PM
counter increases (to measure the service life of each feed roller) when the
paper is fed.
• Blank sheets (covers, chapter covers, slip sheets) are also counted.
• During duplex printing, a sheet printed on two sides and a sheet printed on one
side are each counted as 1 sheet.
To Next Page
Loading...
