Ricoh G108 - Page 136

SERVICE PROGRAM MODE
G108 5-34 SM
8521*
T: PrtPGS/FIN The number of pages processed by the finisher
[0~9999999/ 0 / 1/step]
8524*
P: PrtPGS/FIN [0~9999999/ 0 / 1/step]
001 Sort 005 Z-Fold
002 Stack 006 Punch
003 Staple 007 Other
004 Booklet
• Even if the pages are too many for the finisher to staple, all pages are counted
(including unstapled pages). - Not applicable to this product.
• The counter of stapling (003) increases by +1 when the paper is transported from
the printer to the tray of the finisher. Even if a paper jam occurs on this path, the
counter (003) increases. If the same job is retried, the counter (003) increases
once again (not applicable to this product).
8531*
Staples The number of staples
[0~9999999/ 0 / 1/step]
8581*
T: Counter The number of outputs in a specific color mode
[0~9999999/ 0 / 1/step]
001 Total 007 Copy: B/W
002 Total: Full Color 008 Print: Color
003 B&W/Single Color 009 Print: B/W
004 Development: CMY 010 Total: Color
005 Development: K 011 Total: B/W
006 Copy: Color
8584
P: Counter The number of outputs in a specific color mode
[0~9999999/ 0 / 1/step]
001 B/W 003 Full Color
002 Single Color
8591*
O: Counter The number of A3/DLT, duplex printing, or staples
[0~9999999/ 0 / 1/step]
001 A3/DLT 003 Staple
002 Duplex
• Note that these counters are not for the printer’s application program.
8771*
Dev Counter The number of rotations of the development rollers
[0~9999999/ 0 / 1/step]
001 Total 004 M
002 K 005 C
003 Y