FIRMWARE UPDATE
G108 5-38 SM
5.2 FIRMWARE UPDATE
5.2.1 TYPES OF FIRMWARE
The table lists the firmware programs used by this machine.
Firmware Display
Onboard System Onboard Sys
Onboard Printer Onboard Printer
Onboard WEBSYS Web Support
PHY Multi-protocol Network Support
5.2.2 PRECAUTIONS
Handling SD Card
Do these when you touch SD cards:
• Turn off the main power switch before you insert or remove an SD card. Data in
the SD card may be corrupted if you insert or remove an SD card while the main
power switch is on.
• Do not turn off the main power switch during at the time the machine downloads
a program.
• Keep SD cards in a safe place. Do not keep SD cards in the following places:
• Areas exposed to high temperature, high humidity, direct sunlight, or severe
vibration
• Areas affected by magnetic force
• Do not bend or scratch SD cards.
• Do not drop SD cards or give them shock or vibration.
• Do not format the card using a windows file system (i.e. using a windows “format”
command). A utility is available to properly format the SD card back to its original
format for use with this printer. The utility can be obtained as a download from…
http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html
Upload or Download
In this section (5.2), these words these meanings:
• Upload: To copy data from the printer to the SD card
• Download: To copy data from the SD card to the printer
Network Connection
Explain to the user that they cannot use the printer at the time of firmware update.
Disconnect the printer from the network. Incoming print jobs may affect firmware
update.
To Next Page
Loading...
