Ricoh G133 - Page 328

Service Mode Table
G133 5-6 SM
GW products go to alert
status and wait for the user to
take action.)
 1: HP/SV products (If a tray is
selected using PCL5e
commands and it has paper,
HP/SV products search for
another tray that has the
same paper size/type.)
Bit 5 to 7: Not used. Do not change the
settings.
1001 004 Bit Switch 4 *CTL
Adjusts bit switch settings. DFU
1001 005 Bit Switch 5 *CTL
Bit 0 to 2: Not used. Do not change the
settings.
Bit 3: Enables the “%%” command of the
PostScript detection condition for the auto print
language selection function.
 0: Enabled
 1: Disabled
Bit 4 to 7: Not used. Do not change the
settings.
1001 006 Bit Switch 6 *CTL
1001 007 Bit Switch 7 *CTL
1001 008 Bit Switch 8 *CTL
Adjusts bit switch settings. DFU
1003 [Clear Setting]
1003 001 Initialize System -
Initializes settings in the System menu of the
user mode.
1003 003 Delete Program -
DFU
1004 [Print Summary]