Ricoh G133 - Page 329

Service Mode Table
SM 5-7 G133
Service
Tables
1004 001 Service Summary -
Prints the service summary sheet (a summary
of all the controller settings).
1005 [Display Version]
1005 001 Printer Version -
Displays the version of the controller
firmware.
[Supply Display]
1007
Enables or disables the display for information on each supply.
1007 001 Development *CTL
1007 002 PCU *CTL
1007 003 Transfer *CTL
1007 004 Int. Transfer *CTL
1007 005 Transfer Roller *CTL
1007 006 Fuser *CTL
1007 007 Fuser Oil *CTL
[0 or 1 / 1 / 1 /step]
0: OFF, 1: ON
1101 [ToneCtlSet]
1101 001 Tone (Factory) *CTL
1101 2 Tone (Prev.) *CTL
1101 3 Tone (Current) *CTL
Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
[ToneCtlSet]
*CTL
1102
Sets the printing mode (resolution) for the printer gamma adjustment. The
asterisk (*) shows which mode is set.
 00: *1200x1200Photo