Ricoh G133 - Page 353

Service Mode Table
SM 5-31 G133
Service
Tables
Not used
CPM: BW: L *ENG
[20 to 30 / 30 / 5 cpm/step]
014
Not used
CPM: FC: M *ENG
[20 to 30 / 30 / 5 cpm/step]
015
Not used
CPM: FC: L *ENG
[20 to 30 / 30 / 5 cpm/step]
016
Not used
O/V: Plain *ENG
[0 to 100 / 20 / 1 deg/step]
017
Specifies the offset temperature for plain paper for the CPM down threshold.
CPM down threshold temperature for plain paper = Fusing temperature for
plain paper (SP1-105-030, -032, -034, -036) – this offset value
O/V: M-Thick: BK *ENG
[0 to 100 / 25 / 1 deg/step]
018
Specifies the offset temperature for middle thick paper in B/W mode for the
CPM down threshold.
CPM down threshold temperature for middle thick paper in B/W mode = Fusing
temperature for middle thick paper in B/W mode (SP1-105-099, -101) – this
offset value
O/V: M-Thick: FC *ENG
[0 to 100 / 10 / 1 deg/step]
019
Specifies the offset temperature for middle thick paper in full color mode for
thed CPM down threshold.
CPM down threshold temperature for middle thick paper in full color mode =
Fusing temperature for middle thick paper in full color mode (SP1-105-095,
-097) – this offset value
CPM Value: Plain *ENG
[20 to 30 / 30 / 5 cpm/step]
020
Adjusts the CPM for plain paper. This setting is activated only when the
machine enters the CPM down mode. For details, refer to "CPM Down
System" in the "Detailed Section Descriptions" section.
021
CPM Value: M-Thick: *ENG
[20 to 30 / 30 / 5 cpm/step]