Ricoh G133 - Page 472

Service Mode Table
G133 5-150 SM
003 All *ENG
[0 to 200 / 30 / 10 msec/step]
[Drum Stop Angle]
2906
DFU
001 Y *ENG
002 C *ENG
003 M *ENG
004 Bk *ENG
[0 to 359 / 0 / 1 deg/step]
[ACS Setting (FC to Bk)]
2907
Adjusts the threshold for moving away the image transfer belt from the color
PCUs. This SP moves the image transfer belt away from the color PCUs when
the number of B/W image printouts reaches the number of sheets specified
with this SP after consecutive full color image printouts in the full color mode.
If SP2907-002 is off, the image transfer belt does not move away.
001 Continuous Bk Pages *ENG
[1 to 10 / 1 / 1 sheet/step]
002 ON/OFF *ENG
[0 or 1 / 0 / - ]
0: ACS OFF, 1: ACS ON
[Gain Adjust] Gain Adjustment of Image Transfer Belt Motor
2908
DFU
001 205 mm/sec *ENG
[0 or 1 / 0/ 1/step]]
0: High speed (Low level)
1: Low speed (High level)
002 154 mm/sec *ENG
003 115 mm/sec *ENG
004 77 mm/sec *ENG
[0 or 1 / 1 / 1/step]]
0: High speed (Low level)
1: Low speed (High level)