Bridge Unit (B227)
SM 1-21 G133
Installation
7. Install the bridge unit [F].
8. Open the bridge unit cover [G]
9. Secure it with screw [H] and knob screw [I].
10. Reinstall the operation panel cover [J] ( x 1, x 1, hook).
11. Close the bridge unit cover [K].
Keep the bridge unit cover [K] open during installing the operation panel cover.
Otherwise, you cannot reinstall it.
12. Reassemble the machine.
13. Install the optional finisher (refer to the finisher installation procedure).
To Next Page
Loading...
