Service Mode Table
SM 5-197 G133
Service
Tables
009 Serial Number 1 *ENG
010 Serial Number 2 *ENG
[0 to 255 / - / 1 V/step]
011 Adjustment: Vt *ENG
[0 to 5 / 3 / 0.1 V/step]
012 Adjustment: Vtref *ENG
[0 to 5 / 3 / 0.1 V/step]
013 Adjustment: Vtcnt *ENG
[0 to 5 / 4 / 0.01 V/step]
014 Adjustment: Gamma *ENG
[0 to 2.55 / 0 / 0.01 mg/cm
2
/kV /step]
015 Adjustment: Vcnt Result *ENG
[0 to 9 / 9 / 1 /step]
[Toner Collection Bottle Full Detection]
3800
Displays/ adjusts the toner collection bottle detection settings. These SPs are
used for @Remote.
001 Condition *CTL
[0 to 4 / 0 / 1 /step]
002 Detection Times *CTL
[0 to 50 / - / 1 /step]
003 Print Page After Near Full *CTL
[0 to 1000 / 0 / 1 sheet/step]
004
Pixel Count After Near
Full
*CTL
[0 to 200000 / - / 1 cm
2
/step]
005
Pixel Count After
Replacement
*CTL
Displays the pixel counter after
replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
2
/step]
008 Coefficient *ENG
[0.5 to 1.5 / 1 / 0.1 /step]
011 Notice Setting *ENG
Enables or disables the calling for
@Remote.
[0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
NOTE:
If the toner collection bottle has been
To Next Page
Loading...
