Ricoh G133 - Page 560

Service Mode Table
G133 5-238 SM
007 DLT-T (SEF) *ENG
008 LG-T (SEF) *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF) *ENG
011 12" x 18" *ENG
012 Other *ENG
[Staple Position Adjustment]
6133
Adjusts the staple position for each finisher (B793/B805).
+ Value: Moves the staple position to the rear side.
- Value: Moves the staple position to the front side.
001
Staple Position
(B793/B805)
*ENG
[-3.5 to 3.5 / 0 / 1/step]
[Saddle Stitch Position Adjustment]
6134
Use this SP to adjust the stapling position of the booklet stapler when paper is
stapled and folded in the Booklet Finisher B793.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT-T (SEF)
006 LG-T (SEF)
007 LT-T (SEF)
008 12" x 18"
[-3.0 to 3.0 / 0 / 0.2 mm/step]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.