Ricoh G133 - Page 67

3000-Sheet Finisher (B805)
SM 1-37 G133
Installation
7. Attach the rear joint bracket [E] ( x 2; M4 x 14).
8. Attach the front joint bracket [F] and the holder bracket [G] ( x 2; M4 x 14).
 Holder bracket [G] must be placed outside the front joint bracket [F]. This
bracket is provided with the Bridge Unit (B227).
9. Pull the lock lever [H] ( x 1).
10. Slowly push the finisher to the left side of the machine keeping its front door open until
the brackets [E] [F] go into their slots.
11. Push the lock lever [H], and then secure it ( x 1).
12. Close the front door of the finisher.
13. Connect the finisher connector [I] to the machine.