Ricoh G147 - Page 177

SM 4-27 G147
Trouble
-shooting
 Boot the machine from the SD card.
HDD mail receive data error
872 B
The machine detected that the
HDD was not operating correctly
at power on.
The machine detected that the
HDD was not operating correctly
(could neither read nor write)
while processing incoming email
 HDD defective
 Machine was turned off while the
HDD was being accessed.
 Do SP5832 007 to format the mail
RX data on the HDD.
HDD mail send data error
873 B
An error was detected on the
HDD immediately after the
machine was turned on, or power
was turned off while the machine
used the HDD.
 Do SP5832-007 (Format HDD –
Mail TX Data) to initialize the HDD.
 Replace the HDD
Delete All error 1: HDD
874 D
A data error was detected for the
HDD/NVRAM after the Delete All
option was used. The source of
this error is the Data Overwrite
Security Unit B735 running from
an SD card.
 Turn the main switch off/on and try
the operation again.
 Install the Data Overwrite Security
Unit again. For more, see section “1.
Installation”.
 HDD defective
Delete All error 2: Data area
875 D
An error occurred while the
machine deleted data from the
HDD. The source of this error is
the Data Overwrite Security Unit
 Turn the main switch off/on and try
the operation again.