Ricoh G147 - Page 315

SM 5-125 G147
Service
Tables
- Example 2: To set an SC code with 003 -
This example shows you how to enter "672" for SC672.
 For details about SC code numbers, please refer to the SC tables in Section "4.
Troubleshooting".
1. Select "SP5858-003".
SP5858-003
Any SC Code
2. Push [#Enter].
0000000
_
3. Push [#Enter] to toggle the on the number display in the 2nd line.
0000000
0
4. Push " or $ to display "2".
0000000
2
5. Push [#Enter] to enter the "2" in the line above.
0000002
_
6. Push " or $ to move the cursor to the next digit.
. 0000002
_
7. Repeat Steps 2 to 6 to enter the "7".
. 0000072
_
8. Repeat Steps 2 to 6 to enter the "6".
. 0000672
_
9. Push [Esc] twice.