Ricoh G147 - Page 316

G147 5-126 SM
SP5858 >>
DebugSaveWhen
10. Do the next procedure to select one or more memory modules for the debug error
data recording.
To select one or more memory modules for recording in the debug log
file
1. Select SP5859.
SP5859 >>
LogSaveKey No.
2. Push [#Enter].
SP5859
Key 1
3. Push [#Enter].
0000000
_
 The default settings for Keys 1 to 10 are all zero (“0”).
4. Select the number from the table below, then use these key presses to enter the
number.
0002222
_
Key Press What It Does
" or $
Moves the cursor to select the digit in the line above.
[#Enter] Enters the number entry mode (displays a "0" at the cursor).
" or $
Selects the number to enter at the digit position in the line
above.
[#Enter]
Enters the selected number in the line above and exits the
entry mode you can select the next position with " or $
5. Refer to the table below for the 4-digit numbers to enter for each key. (The
acronyms in parentheses indicate the names of the modules.)