G147 1-34 SM
Check the accessories and their quantities against the following list:
Description Q'ty
1. USB Host Interface Unit Type 7300 1
- Procedure -
Turn off the power switch and disconnect the power supply cord.
1. Remove the cover [1] of board Slot 1 or 2 (
x1)
2. Install the interface board [2] (
x2 knob screws)
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
3. Reattach the application cover (
x1)
To Next Page
Loading...
