Ricoh G179 - Page 75

Tray Heater (Optional Paper Feed Unit)
SM 1-41 G179
Installation
13. Release the optional heater relay connector [14] (= x 1).
14. Connect the optional heater relay connector to the connector [15] (rear side) of the
main frame (= x 1).
15. Reassemble the mainframe and optional LCT.
16. Attach the on/standby decal [16] to the right-hand side of the main power switch.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA