36
If you are using the camera for the first time, read this section.
Note ---------------------------------------------------------------------------------------------------
• Press the shutter release button gently to prevent camera shake.
• The J symbol indicates that camera shake may occur. Hold the camera still and
focus the camera again. You can also turn on the camera shake correction function
to minimize blurring. (GP.91)
• The flash fires twice to increase the AE (Auto Exposure) accuracy.
• You can set the time the still image you have taken appears on the picture display.
You can also set the image not to appear after it is taken. (GP.134)
• You cannot use the camera’s built-in flash when using an external flash. (GP.178)
To Next Page
Loading...
