If you are using the camera for the first time, read this section.
57
Changing the Display with
the DISP. Button
Pressing the DISP. button allows you to change the screen display
mode and toggle the information displayed on the picture display.
During Shooting Mode
Grid Guide ------------------------------------------------------------------------------------------
This displays auxiliary lines on the picture display to help you compose your picture.
These lines are not recorded with images.
Synchro-Monitor Mode -------------------------------------------------------------------------
This turns the picture display off except when the camera is operated. This mode is
effective for saving power consumption. In this mode, pressing the shutter release
button halfway turns the picture display on. Subsequently, pressing the shutter release
button fully displays the shot image on the picture display and then turns the picture
display off.
Note ---------------------------------------------------------------------------------------------------
When [ENLGE PHOTO ICON] is turned on (GP.139), the following are not
displayed on the normal symbol display screen.
Zoom bar/Focus bar, Date Imprint, Sharpness, Color Depth, Edit Detection
Normal Symbol Display
No Display
Histogram Grid Guide
Picture Display Off
(Synchro-Monitor Mode)
Press the DISP. button to
change the display.
To Next Page
Loading...
